blog-ahmza-com/content/posts/securing-ssh.md

---
title: Securing SSH
date: 2021-12-07T22:41:02Z
author: "ahmza"
draft: false
weight:

tags: ["HomeLab", "SSH", "RemoteAccess"]
description: "Ever wanted to make your SSH connections more secure. Read this"
canonicalURL: "https://blog.ahmza.com/Page%28/posts/securing-ssh.md%29"

cover:
    image: "/img/Secure-SSH/Padlock.png"
    alt: "ssh-alt image" # alt text
    caption: "<text>" # display caption under cover
    relative: false # when using page bundles set this to true
showtoc: true
searchHidden: false
---
# **Introduction**
SSH is a widely used protocol to access remote devices. The problem
with SSH is at the authentication stage, Brute force attacks are one of
the ways an SSH connection can be compromised. A malicious actor will
constantly hammer the remote host with different passwords until it can
gain access. With further configuration of SSH we can make the service
a lot more secure.

# **Configure SSH**
![this is fine](/img/gifs/this-is-fine.gif)
> **Famous last words:** Configuring SSH like many things in Linux is
as simple as editing a few config files

Always be sure to **create a backup file** it's very easy to end up
locking yourself out of a device.

I would recommend practising on a machine that is not critical.

## **Create SSH Keys**
SSH keys use public and private key encryption for authentication.

To create a set of keys, **on the client do:**
``` bash
ssh-keygen
```
You will be asked where you want to save the keys, **I recommend the \
default location** for less hair pulling later.
``` bash
Enter file in which to save the key (/home/user/.ssh/id_rsa):
```
You will be asked to enter a password for the ssh keys, be sure to use
a strong password.
``` bash
Enter passphrase (empty for no passphrase):
```
Once that is done you will see a confirmation screen like the one below
```
Output
Your identification has been saved in /home/user/.ssh/id_rsa
Your public key has been saved in /home/user/.ssh/id_rsa.pub
The key fingerprint is:
SHA256:tIurljnWJRBc1RnHUJQ5GtND7p9HWKnjV6zjE9AFR1Y user@host
The key's randomart image is:
+---[RSA 3072]----+
|   . .....oX=o.oE|
|    o     =oB  oo|
|     .  .  +.+ o.|
|    .  . .... o+ |
|     .  S   .+. +|
|      ....  ..o+.|
|     +.o.    .=o.|
|    * ..     .oo |
|   o.o.       .. |
+----[SHA256]-----+
```

## **Copy SSH Keys**
> **Quick note:** user@host is the **username** on the **remeote host**
you would like to copy your public key to.

``` bash
ssh-copy-id user@host
```

**If asked to confirm the connection to the remote host answer yes**, this
happens when a new machine with an unknown identity wants to connect to
the client.

```
Output
The authenticity of host 'host(host)' can't be established.
ECDSA key fingerprint is xx:xx:xx:xx:xx:xx:xx:xx.
Are you sure you want to continue connecting (yes/no)? yes
```

You will then be asked to **enter a password** for the user on the remote
host

```
Output
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
user@host's password:
```

If successful you should be able to access the device using the SSH key

To verify this, SSH to the device and **it should ask for the Keys's
password not the users**

``` bash
Enter passphrase for key '/home/user/.ssh/id_rsa':
```

## **Modify SSH Config**
create a backup
``` bash
sudo cp /etc/ssh/sshd_config /etc/ssh/sshd_config.bak
```
open the original file in a text editor
``` bash
sudo vim /etc/ssh/sshd_config
```
For a new user this might be daunting. Take your time and you will be
fine 😊

![that's a big one](/img/gifs/thats-a-big-one.gif)

**Lines we want to modify**

> **Quick note:** you may need to uncomment some lines as well as add a
few

* Protocol 2 - add to line 15
* Port 2222 - modify line 17
* PermitRootLogin no - modify line 36
* Max Auth Tries 5 - modify line 38
* PasswordAuthentication no - modify line 60
* PermitEmptyPasswords no -modify line 61
* AllowUsers ahmza - add line 67
* ClientAliveInterval 180 - modify line 104

```
#       $OpenBSD: sshd_config,v 1.103 2018/04/09 20:41:22 tj Exp $

# This is the sshd server system-wide configuration file.  See
# sshd_config(5) for more information.

# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin

# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented.  Uncommented options override the
# default value.

Include /etc/ssh/sshd_config.d/*.conf

Protocol 2

Port 2222
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::

#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key
#HostKey /etc/ssh/ssh_host_ed25519_key

# Ciphers and keying
#RekeyLimit default none

# Logging
#SyslogFacility AUTH
#LogLevel INFO

# Authentication:

#LoginGraceTime 2m
PermitRootLogin no
#StrictModes yes
MaxAuthTries 5
#MaxSessions 10

#PubkeyAuthentication yes

# Expect .ssh/authorized_keys2 to be disregarded by default in future.
#AuthorizedKeysFile     .ssh/authorized_keys .ssh/authorized_keys2

#AuthorizedPrincipalsFile none

#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody

# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes

# To disable tunneled clear text passwords, change to no here!
PasswordAuthentication no
PermitEmptyPasswords no

AllowUsers ahmza

# Change to yes to enable challenge-response passwords (beware issues with
# some PAM modules and threads)
ChallengeResponseAuthentication no

# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no

# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
#GSSAPIStrictAcceptorCheck yes
#GSSAPIKeyExchange no

# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication.  Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
UsePAM yes

#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
#PermitTTY yes
PrintMotd no
#PrintLastLog yes
#TCPKeepAlive yes
#PermitUserEnvironment no
#Compression delayed
ClientAliveInterval 180
#ClientAliveCountMax 3
#UseDNS no
#PidFile /var/run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none

# no default banner path
#Banner none

# Allow client to pass locale environment variables
AcceptEnv LANG LC_*

# override default of no subsystems
Subsystem       sftp    /usr/lib/openssh/sftp-server

# Example of overriding settings on a per-user basis
#Match User anoncvs
#       X11Forwarding no
#       AllowTcpForwarding no
#       PermitTTY no
#       ForceCommand cvs server
```
![not so bad](/img/gifs/star-trek-not-so-bad.gif)

**Now lets explain what we just did**
* **Protocol 2** - released in 2006, SSH2 introduced improved
encryption algorithms.
* **Port 2222** - The port number can be whatever number you want.
Choose something other than 22 this will help hide your device from malicious actors
* **PermitRootLogin no** - If the root account were to be compromised
then the attacker has full control of the system so we stop it from being able to log in.
* **MaxAuthTries 5** - After 5 failed attempts the remote host blocks
requests from that IP for a period of time.
* **PasswordAuthentication no** - We have the SSH key installed so we
no longer need to have password authentication.
* **PermitEmptyPasswords no** - We don't want to allow empty passwords
to be used as authentication for obvious reasons.
* **AllowUsers username** - Add the usernames of users you want to be
able to connect to the remote host and other users trying to connect
will be dropped.
* **Client Alive Interval 180** - Drop the connection after a certain
period of inactivity

## **Check were able to connect**
restart sshd service
``` bash
sudo systemctl restart sshd
```
**Keep the current SSH connection open** and create a new session.

If you are able to connect to the remote hosts then you are all set. If
not then you still have the initial connection to the remote host to
roll back the changes and troubleshoot.

# **Success**

![clap](/img/gifs/clap.gif)

# **Setting up** ***Fail2Ban***
_Fail2Ban_ is an intrusion prevention tool. Although we are slowing
bots down with MaxAuthTries the attacker is still able to carry on
brute forcing. Which is what Fail2Ban is for, it actually blocks the
connections from that IP.

## **Install** ***Fail2Ban***
**We will install Fail2Ban on the remote host**
First upgrade any packages, then **install** ***Fail2Ban***
``` bash
sudo apt update && sudo apt upgrade
sudo apt install fail2ban
```
Now we need to enable the service so it starts when the remote host
starts
``` bash
sudo systemctl enable --now fail2ban
```
## **Configure** ***Fail2Ban***
The Fail2Ban config file we want to edit is called **jail.local** located in **/etc/fail2ban/**
open jail.local in your editor of choice
``` bash
sudo vim /etc/fail2ban/jail.local
```
The config for _Fail2Ban_ is a lot shorter than sshd so this should be
quick
```
[DEFAULT]
    bantime = 8h
    ignoreip = 127.0.0.1 <ip addresses to be ignored>
    ignoreself = true

[sshd]
    enabled = true
    port = 2222
    filter = sshd
    logpath = /var/log/auth.log
    maxretry = 3
    findtime = 10m
```

**[Default]** - Settings in here apply to all jails

* **bantime** - how long the ban will last
* **ignoreip** - IP addresses to ignore
* **ignoreself** - stops from locking itself out

**[sshd]** - this is the jail for sshd

* **enabled** - decides weather the jail is active or not
* **port** - the port number the service
* **filter** - tells the jail which filter to use from /etc/fail2ban/filter.d
* **logpath** - where the log you want fail2ban to read is
* **maxretry** - Times the client can attempt a login before being banned
* **findtime** - An amount of time which maxretry must occur to trigger a
ban for example in 10 minutes if 3 failed login attempts are made the
ban the IP

**Restart** ***Fail2Ban*** to load the configuration
``` bash
sudo systemctl restart fail2ban
```

## **Testing** ***Fail2Ban***
To test Fail2Ban lets create a test user and set a password for the
user
``` bash
sudo useradd test
sudo passwd test
```
**open the sshd config**
``` bash
sudo vim /etc/ssh/sshd_config
```
modify the line **PasswordAuthentication** to say **yes** and add the test user to **AllowUsers**
``` bash
PasswordAuthentication yes
AllowUsers user test
```
**restart the sshd service**
``` bash
sudo systemctl restart sshd
```
Attempt to login to the remote host using the test account using an
incorrect password. After 3 failed attempts it should say connection
refused.
``` bash
ssh test@host -p 2222
```
_Fail2Ban_ should do something along the lines of ...
![you shall not pass](/img/gifs/you-shall-not-pass.gif)
log back in as your  normal user, remove the test user and restore the
sshd config.

**To remove the user**
``` bash
sudo userdel test
```
**restore the /etc/ssh/sshd_config file**
``` bash
sudo vim /etc/ssh/sshd_config
```
Set **PasswordAuthentication** back to **no** and remove test from **AllowUsers**
``` bash
PasswordAuthentication no
AllowUsers user
```
# **Conclusion**
well done, you managed to make it through all that !! At least now you
can be reassured that if them pesky brute-force attackers decide to
target your machine they wont have a fun time being in Jail 🤣 sorry
bad joke.

By now you have managed to setup an ssh key for a client and copy it to
a remote host, re-configure the sshd config to lockdown authentication
and last but not least install and configure Fail2Ban to block pesky
attackers.

![proud](/img/gifs/proud.gif)