attempt to update the screen settings

Arming the built-in xHCI root hubs made them wake on hub-level events
(USB-C PD negotiation, SD card reader, internal peripherals), causing the
laptop to immediately self-wake from suspend. Drop the root-hub rule and arm
only the keyboard leaf by VID:PID; a leaf device's remote-wakeup propagates
through the hub without the hub's own wakeup flag being set.

.gitignore

@@ -1 +1,6 @@
 .session
+
+# `nix build` / `nixos-rebuild build` output symlink. Points into /nix/store and
+# churns on every build, so it must not be tracked.
+result
+result-*

modules/apps/sync-hardware.nix

@@ -0,0 +1,84 @@
+{...}: {
+  # `nix run .#sync-hardware`
+  #
+  # Refreshes the calling host's generated hardware module in-repo, replacing the
+  # old habit of importing /etc/nixos/hardware-configuration.nix by absolute path.
+  #
+  # Why bother: that absolute import left the flake impure (every eval needed
+  # --impure, since the file lives outside the store) and — worse — meant *both*
+  # hosts resolved to whichever machine's hardware file was on disk at build
+  # time. Building t480 from shadow silently baked in shadow's disk UUIDs.
+  #
+  # Run this on a host after changing its hardware, then commit the result.
+  perSystem = {pkgs, ...}: let
+    script = pkgs.writeShellApplication {
+      name = "sync-hardware";
+      runtimeInputs = [pkgs.nixos-install-tools pkgs.git pkgs.coreutils pkgs.nettools];
+      text = ''
+        set -euo pipefail
+
+        host="''${1:-$(hostname)}"
+
+        root=$(git rev-parse --show-toplevel 2>/dev/null || true)
+        if [ -z "$root" ]; then
+          echo "sync-hardware: run this from inside the config repo." >&2
+          exit 1
+        fi
+
+        dir="$root/modules/hosts/$host"
+        if [ ! -d "$dir" ]; then
+          echo "sync-hardware: no host directory at $dir" >&2
+          echo "  known hosts: $(cd "$root/modules/hosts" && echo *)" >&2
+          echo "  pass an explicit name with: nix run .#sync-hardware -- <host>" >&2
+          exit 1
+        fi
+
+        out="$dir/_hardware.nix"
+
+        # --no-filesystems is load-bearing: fileSystems/swapDevices are declared
+        # by hand in the host's disks.nix. Without the flag this would emit
+        # entries for whatever is mounted right now, duplicating (and conflicting
+        # with) those definitions.
+        header=$(cat <<'EOF'
+        # GENERATED FILE — do not edit by hand.
+        #
+        # Regenerate on the host itself with:  nix run .#sync-hardware
+        #
+        # Produced by `nixos-generate-config --show-hardware-config --no-filesystems`.
+        # The --no-filesystems flag is deliberate: fileSystems and swapDevices are
+        # declared by hand in ./disks.nix, so regenerating this file can never clobber
+        # them or emit duplicates for whatever happened to be mounted at the time.
+        #
+        # Leading underscore keeps import-tree from auto-importing this as a
+        # flake-parts module (its filter drops any path containing "/_"); it is
+        # imported explicitly from ./default.nix instead.
+        EOF
+        )
+
+        tmp=$(mktemp)
+        trap 'rm -f "$tmp"' EXIT
+
+        # Strip the upstream 3-line "Do not modify" banner; ours replaces it.
+        {
+          printf '%s\n' "$header" | sed 's/^        //'
+          nixos-generate-config --show-hardware-config --no-filesystems | tail -n +4
+        } > "$tmp"
+
+        if [ -f "$out" ] && cmp -s "$tmp" "$out"; then
+          echo "sync-hardware: $out already up to date."
+          exit 0
+        fi
+
+        cp "$tmp" "$out"
+        echo "sync-hardware: wrote $out"
+        echo "  review with: git diff -- $out"
+      '';
+    };
+  in {
+    apps.sync-hardware = {
+      type = "app";
+      program = "${script}/bin/sync-hardware";
+      meta.description = "Regenerate modules/hosts/<host>/_hardware.nix from the running machine";
+    };
+  };
+}

modules/attrs/cad/default.nix

@@ -0,0 +1,16 @@
+{
+  self,
+  moduleWithSystem,
+  ...
+}: {
+  flake.nixosModules.cad = moduleWithSystem ({...}: let
+    modules = with self.nixosModules; [
+      freecad
+      openscad
+      prusa-slicer
+    ];
+  in {
+    imports = modules;
+  });
+}
+

modules/attrs/netops/default.nix

@@ -0,0 +1,15 @@
+{
+  self,
+  moduleWithSystem,
+  ...
+}: {
+  flake.nixosModules.netops = moduleWithSystem ({...}: let
+    modules = with self.nixosModules; [
+      winbox
+      unraid-usb-creator
+    ];
+  in {
+    imports = modules;
+  });
+}
+

modules/features/freecad/default.nix

@@ -0,0 +1,9 @@
+{...}: {
+  # Screenshot capture, region selection, annotation, and clipboard support for
+  # the Hyprland screenshot keybinds managed in the dotfiles repo.
+  flake.nixosModules.freecad = {pkgs, ...}: {
+    environment.systemPackages = with pkgs; [
+      freecad
+    ];
+  };
+}

modules/features/hyprland/default.nix

@@ -10,6 +10,8 @@
       fuzzel
       ghostty
       waybar
+      quickshell
+      screenshot
     ];
   in {
     imports = modules;
@@ -27,6 +29,106 @@
     services.xserver.enable = true;
     security.polkit.enable = true;
 
+    # Removable-media automounting.
+    #
+    # udiskie is only a tray frontend to the udisks2 D-Bus daemon, so the daemon
+    # has to be enabled or udiskie runs but can never mount anything. Note this
+    # covers removable media *only*: udisks2 reports the internal SATA disks as
+    # HintSystem=true, so udiskie leaves them alone. Permanently attached drives
+    # are declared in the host's disks.nix instead.
+    services.udisks2.enable = true;
+
+    # Session daemons run as systemd user units bound to graphical-session.target
+    # (which UWSM manages properly) rather than from the hypr autostart, so they
+    # start and stop with the session instead of leaking across logins.
+    #
+    # hypridle and hyprsunset both ship their own unit, but in
+    # $out/share/systemd/user — NOT $out/lib/systemd/user. That distinction is
+    # why they need redeclaring rather than just enabling:
+    #
+    #   * `systemd.packages = [pkgs.hypridle]` would collect nothing. nixpkgs'
+    #     generateUnits globs only $pkg/etc/systemd/user and $pkg/lib/systemd/user.
+    #   * The units are nonetheless *visible* to the user manager, via
+    #     environment.pathsToLink -> /run/current-system/sw/share/systemd/user,
+    #     which is on the search path because XDG_DATA_DIRS ends with
+    #     /run/current-system/sw/share. But visible is not enabled: nothing
+    #     creates the WantedBy symlink, so they sit unstarted.
+    #   * `systemd.user.services.<n>.wantedBy` alone would not help either — with
+    #     no other keys NixOS synthesises a *replacement* unit with an empty
+    #     [Service] section, shadowing upstream's via /etc/systemd/user (which
+    #     takes precedence over $XDG_DATA_DIRS).
+    #
+    # So the full definition below is deliberate. It is close to upstream's but
+    # not identical: hyprsunset's `Requires=graphical-session.target` is dropped
+    # on purpose (PartOf already propagates the stop, while Requires would also
+    # make starting hyprsunset by hand pull up the whole session target), and
+    # hypridle gains an explicit `path` because its config shells out.
+    systemd.user.services = {
+      udiskie = {
+        description = "udiskie removable media automounter";
+        partOf = ["graphical-session.target"];
+        after = ["graphical-session.target"];
+        wantedBy = ["graphical-session.target"];
+        serviceConfig = {
+          Type = "simple";
+          # -s = smart tray: the icon appears only while removable media is present.
+          ExecStart = "${pkgs.udiskie}/bin/udiskie -s";
+          Restart = "on-failure";
+        };
+      };
+
+      hypridle = {
+        description = "Hyprland idle daemon";
+        documentation = ["https://wiki.hyprland.org/Hypr-Ecosystem/hypridle"];
+        partOf = ["graphical-session.target"];
+        after = ["graphical-session.target"];
+        wantedBy = ["graphical-session.target"];
+        # ~/.config/hypr/hypridle.conf calls out to these: hyprlock (lock_cmd),
+        # pidof (the `pidof hyprlock ||` guard), brightnessctl (backlight
+        # listener), hyprctl (dpms), loginctl + systemctl (sleep/lock),
+        # notify-send (unlock_cmd).
+        #
+        # MAINTENANCE HAZARD: that config lives in a *different* repo (the stow'd
+        # `hypr` package in the dotfiles repo), so this list can silently drift
+        # out of sync with it. A binary used there but missing here fails as a
+        # bare "command not found" inside hypridle, and Restart=on-failure will
+        # NOT catch it because hypridle itself stays up — the idle action just
+        # quietly stops working. Add any new binary to both places.
+        path = with pkgs; [
+          hyprlock
+          hyprland
+          brightnessctl
+          libnotify
+          procps
+          systemd
+        ];
+        unitConfig.ConditionEnvironment = "WAYLAND_DISPLAY";
+        serviceConfig = {
+          Type = "simple";
+          ExecStart = "${pkgs.hypridle}/bin/hypridle";
+          Restart = "on-failure";
+        };
+      };
+
+      hyprsunset = {
+        description = "Hyprland blue-light filter";
+        documentation = ["https://wiki.hyprland.org/Hypr-Ecosystem/hyprsunset"];
+        partOf = ["graphical-session.target"];
+        after = ["graphical-session.target"];
+        wantedBy = ["graphical-session.target"];
+        unitConfig.ConditionEnvironment = "WAYLAND_DISPLAY";
+        serviceConfig = {
+          Type = "simple";
+          ExecStart = "${pkgs.hyprsunset}/bin/hyprsunset";
+          Restart = "on-failure";
+          # Intentionally only on hyprsunset, not hypridle/udiskie: upstream's
+          # hyprsunset.service sets Slice=session.slice and upstream's
+          # hypridle.service does not. Not an oversight — don't "fix" it.
+          Slice = "session.slice";
+        };
+      };
+    };
+
     environment.systemPackages = with pkgs; [
       # hypr* ecosystem (keybinds / hypridle / autostart)
       hyprlock
@@ -47,7 +149,6 @@
       udiskie
       brightnessctl
       # clipboard
-      wl-clipboard
       cliphist
       # theming
       gsettings-desktop-schemas

modules/features/moonlight/default.nix

@@ -0,0 +1,7 @@
+{...}: {
+  flake.nixosModules.moonlight = {pkgs, ...}: {
+    environment.systemPackages = with pkgs; [
+      moonlight-qt
+    ];
+  };
+}

modules/features/nextcloud/default.nix

@@ -0,0 +1,8 @@
+{...}: {
+  # Nextcloud desktop sync client. Account and sync settings remain per-user.
+  flake.nixosModules.nextcloud = {pkgs, ...}: {
+    environment.systemPackages = with pkgs; [
+      nextcloud-client
+    ];
+  };
+}

modules/features/openscad/default.nix

@@ -0,0 +1,10 @@
+{...}: {
+  # Screenshot capture, region selection, annotation, and clipboard support for
+  # the Hyprland screenshot keybinds managed in the dotfiles repo.
+  flake.nixosModules.openscad = {pkgs, ...}: {
+    environment.systemPackages = with pkgs; [
+      openscad
+      openscad-lsp
+    ];
+  };
+}

modules/features/printing/default.nix

@@ -0,0 +1,104 @@
+{...}: {
+  # CUPS printing + eSCL scanning for the networked EPSON ET-8550.
+  #
+  # Two queues, deliberately:
+  #   EPSON_ET_8550        driverless / IPP Everywhere. The default. PDF is
+  #                        passed straight through and the printer's own RIP
+  #                        does the work. 51 page sizes, 26 borderless, and the
+  #                        only queue that can print CD/DVDs (MediaType Disc).
+  #   EPSON_ET_8550_Photo  Epson ESC/P-R. Host rasterises to ESC/P-R at 360dpi.
+  #                        34 sizes, 12 borderless, no disc support - but it is
+  #                        the only way to reach Epson's named media/quality
+  #                        presets ("Epson Ultra Glossy-Max Quality" etc) that
+  #                        IPP Everywhere cannot express. Kept for photo A/B.
+  #
+  # Note both PPDs are 360x360 HWResolution - escpr2 is not higher resolution.
+  #
+  # Both queues use the mDNS name, not 10.10.20.62, so a DHCP lease change
+  # doesn't break them. services.avahi.nssmdns4 is what resolves it.
+  # Port 9100 is closed on this printer, so socket:// is not an option.
+  #
+  # cups-browsed is off: it would auto-create a third duplicate queue for the
+  # same printer. avahi stays on for mDNS resolution and scanner discovery.
+  flake.nixosModules.printing = {
+    config,
+    lib,
+    pkgs,
+    ...
+  }: {
+    programs.system-config-printer.enable = true;
+
+    services.avahi = {
+      enable = true;
+      nssmdns4 = true;
+    };
+
+    services.printing = {
+      enable = true;
+      browsed.enable = false;
+      drivers = with pkgs; [
+        epson-escpr2
+      ];
+    };
+
+    hardware.printers = {
+      ensureDefaultPrinter = "EPSON_ET_8550";
+      ensurePrinters = [
+        {
+          name = "EPSON_ET_8550";
+          description = "EPSON ET-8550 (driverless)";
+          location = "Network";
+          deviceUri = "ipp://EPSONA70973.local:631/ipp/print";
+          model = "everywhere";
+        }
+        {
+          name = "EPSON_ET_8550_Photo";
+          description = "EPSON ET-8550 (ESC/P-R photo presets)";
+          location = "Network";
+          deviceUri = "ipp://EPSONA70973.local:631/ipp/print";
+          model = "epson-inkjet-printer-escpr2/Epson-ET-8550_Series-epson-escpr2-en.ppd";
+        }
+      ];
+    };
+
+    # hardware/printers.nix orders ensure-printers only after cups.service, but
+    # our deviceUri is an mDNS name and the driverless queue queries the printer
+    # while it is created. Run the generated script asynchronously so an offline
+    # printer cannot fail boot or nixos-rebuild, then retry until it is reachable.
+    systemd.services.ensure-printers = lib.mkIf (config.hardware.printers.ensurePrinters != [] && config.services.printing.enable) {
+      after = [
+        "avahi-daemon.service"
+        "network-online.target"
+        "nss-lookup.target"
+      ];
+      wants = [
+        "avahi-daemon.service"
+        "network-online.target"
+      ];
+      serviceConfig = {
+        Type = lib.mkForce "simple";
+        Restart = "on-failure";
+        RestartSec = "1min";
+      };
+    };
+
+    # eSCL/AirScan. The printer advertises _uscan._tcp with rs=eSCL and
+    # mopria-certified-scan=1.3, so sane-airscan drives it with no vendor
+    # backend. No scanner/lp group needed - there's no local udev device.
+    #
+    # sane-backends ships its own `escl` backend which also claims eSCL
+    # devices. Left enabled it double-lists the scanner and, worse, GETs the
+    # printer's web root and dumps the HTML response onto scanimage's stdout.
+    # Disabling it leaves sane-airscan as the only eSCL backend, which reports
+    # a far better device string (airscan:e0:EPSON ET-8550 Series).
+    hardware.sane = {
+      enable = true;
+      extraBackends = [pkgs.sane-airscan];
+      disabledDefaultBackends = ["escl"];
+    };
+
+    environment.systemPackages = with pkgs; [
+      simple-scan
+    ];
+  };
+}

modules/features/prusa-slicer/default.nix

@@ -0,0 +1,8 @@
+{...}: {
+  # PrusaSlicer package only; printer and filament profiles remain per-user.
+  flake.nixosModules.prusa-slicer = {pkgs, ...}: {
+    environment.systemPackages = with pkgs; [
+      prusa-slicer
+    ];
+  };
+}

modules/features/quickshell/default.nix

@@ -5,5 +5,6 @@
     environment.systemPackages = with pkgs; [
       quickshell
     ];
+    qt.enable = true;
   };
 }

modules/features/screenshot/default.nix

@@ -0,0 +1,12 @@
+{...}: {
+  # Screenshot capture, region selection, annotation, and clipboard support for
+  # the Hyprland screenshot keybinds managed in the dotfiles repo.
+  flake.nixosModules.screenshot = {pkgs, ...}: {
+    environment.systemPackages = with pkgs; [
+      grim
+      slurp
+      satty
+      wl-clipboard
+    ];
+  };
+}

modules/features/sunshine/default.nix

@@ -0,0 +1,13 @@
+{...}: {
+  # TODO: previously injected SLSsteam via LD_AUDIT from the sls-steam flake. Now stock.
+  flake.nixosModules.sunshine = {pkgs, ...}: {
+    services.sunshine = {
+      enable = true;
+      autoStart = true;
+      capSysAdmin = true;
+      openFirewall = true;
+      settings.output_name = "DP-3"
+    };
+    hardware.uinput.enable = true;
+  };
+}

modules/features/unraid-usb-creator/default.nix

@@ -0,0 +1,119 @@
+{...}: {
+  # Unraid USB Creator - writes Unraid OS straight to a USB stick, streaming the
+  # image from unraid.net instead of making you download it first.
+  #
+  # Not in nixpkgs, and upstream ships an AppImage only, so this is a repack.
+  # The AppImage is a Qt6/QML app (a fork of rpi-imager) built with linuxdeploy,
+  # meaning it already vendors the entire Qt6 stack, xcb, icu, gnutls and krb5 in
+  # usr/lib. We keep that bundle verbatim and only autoPatchelf it against the
+  # handful of libraries linuxdeploy deliberately left out (libc, libstdc++, GL,
+  # X11, fontconfig, ...). No FHS wrapper needed, so no 400MB buildFHSEnv closure.
+  flake.nixosModules.unraid-usb-creator = {
+    pkgs,
+    lib,
+    ...
+  }: let
+    pname = "unraid-usb-creator";
+    version = "1.1.0";
+
+    # unraid.net/download's "stable" link is a redirect to this GitHub asset.
+    # Note the v1.1.0 tag is not returned by the releases API (the API only lists
+    # the v2.0.x line), but the download URL is live and matches the checksum.
+    appimage = pkgs.fetchurl {
+      url = "https://github.com/unraid/usb-creator-next/releases/download/v${version}/${pname}-${version}.appimage";
+      hash = "sha256-NI/SMgOuzifvjhtK4Py96lbuI/uvJO0NiMr2zNtNSUk=";
+    };
+
+    unraid-usb-creator = pkgs.stdenvNoCC.mkDerivation {
+      inherit pname version;
+
+      src = pkgs.appimageTools.extract {
+        inherit pname version;
+        src = appimage;
+      };
+
+      nativeBuildInputs = with pkgs; [
+        autoPatchelfHook
+        makeWrapper
+      ];
+
+      # Only the libraries the AppImage does *not* vendor. Everything else
+      # resolves inside $out/share/unraid-usb-creator/lib.
+      buildInputs = with pkgs; [
+        e2fsprogs # libcom_err.so.2, pulled in by the vendored krb5
+        fontconfig
+        freetype
+        gmp # pulled in by the vendored nettle/gnutls
+        libgpg-error
+        libglvnd # libGL / libGLX / libEGL / libOpenGL
+        libx11 # also provides libX11-xcb
+        libxcb
+        stdenv.cc.cc # libstdc++ / libgcc_s
+        zlib
+      ];
+
+      # Qt's openssl TLS backend resolves libssl/libcrypto with dlopen, so
+      # autoPatchelf never sees the dependency. Without this the app cannot fetch
+      # the release JSON or stream the image over HTTPS.
+      #
+      # This has to be appendRunpaths and NOT runtimeDependencies: in
+      # auto-patchelf, `rpath += runtime_deps` lives inside the set-interpreter
+      # branch, so it only ever reaches executables, while `rpath.extend(
+      # append_rpaths)` runs for every patched file. The dlopen happens from
+      # plugins/tls/libqopensslbackend.so, and glibc resolves dlopen against the
+      # calling object's DT_RUNPATH - the wrapper binary's RUNPATH is not
+      # consulted - so the path has to be on the plugin itself.
+      appendRunpaths = ["${pkgs.openssl.out}/lib"];
+
+      installPhase = ''
+        runHook preInstall
+
+        # qt.conf next to the binary declares Prefix=../ with Plugins=plugins and
+        # Qml2Imports=qml, so the usr/ layout has to be preserved as a unit.
+        install -Dm755 usr/bin/unraid-usb-creator -t $out/share/${pname}/bin
+        install -Dm444 usr/bin/qt.conf -t $out/share/${pname}/bin
+        cp -r usr/lib usr/plugins usr/qml $out/share/${pname}/
+
+        cp -r usr/share/icons $out/share/
+        install -Dm444 usr/share/metainfo/*.xml -t $out/share/metainfo
+        install -Dm444 usr/share/applications/*.desktop -t $out/share/applications
+
+        # mkfs.fat is shelled out to when formatting the stick; syslinux is NOT
+        # needed as a runtime dep because upstream statically vendors it.
+        #
+        # linuxdeploy only bundled the xcb platform plugin - there is no
+        # libqwayland*.so anywhere in the AppImage - so this always runs through
+        # XWayland under Hyprland. Pinning the platform avoids Qt first trying
+        # wayland and falling back; --set-default rather than --set so it can
+        # still be overridden if upstream ever ships the Wayland plugin.
+        makeWrapper $out/share/${pname}/bin/unraid-usb-creator $out/bin/${pname} \
+          --prefix PATH : ${lib.makeBinPath (with pkgs; [dosfstools util-linux])} \
+          --set-default QT_QPA_PLATFORM xcb
+
+        runHook postInstall
+      '';
+
+      postFixup = ''
+        substituteInPlace $out/share/applications/*.desktop \
+          --replace-fail "Exec=unraid-usb-creator" "Exec=$out/bin/${pname}"
+      '';
+
+      meta = {
+        description = "Tool for writing Unraid OS to USB drives";
+        homepage = "https://github.com/unraid/usb-creator-next";
+        license = lib.licenses.asl20;
+        sourceProvenance = [lib.sourceTypes.binaryNativeCode];
+        platforms = ["x86_64-linux"];
+        mainProgram = pname;
+      };
+    };
+  in {
+    environment.systemPackages = [unraid-usb-creator];
+
+    # The app enumerates and unmounts removable drives over the UDisks2 D-Bus API
+    # rather than poking /dev directly, which is also how it avoids needing root.
+    # hyprland/default.nix already enables this for udiskie; repeated here so the
+    # module is self-contained on a host that does not use Hyprland.
+    services.udisks2.enable = true;
+  };
+}

modules/features/via/default.nix

@@ -0,0 +1,15 @@
+{...}: {
+  # QMK/VIA keyboard tooling. QMK's uaccess rule lets the active local seat talk
+  # to HID devices; remote and non-seat sessions intentionally get no access.
+  flake.nixosModules.via = {pkgs, ...}: {
+    environment.systemPackages = with pkgs; [
+      via
+      qmk
+      vial
+    ];
+
+    # Do not add pkgs.via or pkgs.vial to services.udev.packages: both make
+    # every hidraw device world-writable. QMK's rules use seat-scoped ACLs.
+    hardware.keyboard.qmk.enable = true;
+  };
+}

modules/features/winbox/default.nix

@@ -0,0 +1,10 @@
+{...}: {
+  # MikroTik RouterOS configuration client. pkgs.winbox is winbox4, which is
+  # already autoPatchelf'd against the Qt/xcb stack it needs, so it does not
+  # rely on nix-ld. Note the installed binary is `WinBox`, not `winbox`.
+  flake.nixosModules.winbox = {pkgs, ...}: {
+    environment.systemPackages = with pkgs; [
+      winbox
+    ];
+  };
+}

modules/features/yazi/default.nix

@@ -0,0 +1,8 @@
+{...}: {
+  # Yazi a cli file explorer.
+  flake.nixosModules.yazi = {pkgs, ...}: {
+    environment.systemPackages = with pkgs; [
+      yazi
+    ];
+  };
+}

modules/hosts/shadow/_hardware.nix

@@ -0,0 +1,27 @@
+# GENERATED FILE — do not edit by hand.
+#
+# Regenerate on the host itself with:  nix run .#sync-hardware
+#
+# Produced by `nixos-generate-config --show-hardware-config --no-filesystems`.
+# The --no-filesystems flag is deliberate: fileSystems and swapDevices are
+# declared by hand in ./disks.nix, so regenerating this file can never clobber
+# them or emit duplicates for whatever happened to be mounted at the time.
+#
+# Leading underscore keeps import-tree from auto-importing this as a
+# flake-parts module (its filter drops any path containing "/_"); it is
+# imported explicitly from ./default.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/installer/scan/not-detected.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "nvme" "xhci_pci" "ahci" "usbhid" "uas" "sd_mod" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-amd" ];
+  boot.extraModulePackages = [ ];
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.amd.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+}

modules/hosts/shadow/default.nix

@@ -5,8 +5,12 @@
 }: {
   flake.nixosConfigurations.shadow = inputs.nixpkgs.lib.nixosSystem {
     modules = with self.nixosModules; [
+      # Generated hardware scan, in-repo so the flake stays pure.
+      # Refresh with `nix run .#sync-hardware` (run on shadow itself).
+      ./_hardware.nix
       desktop
       shadowConfiguration
+      shadowDisks
       cpuAmd
       gpuNvidia
       development
@@ -15,7 +19,12 @@
       discord
       gaming
       bottles
+      netops
+      prusa-slicer
+      printing
+      via
+      nextcloud
+      sunshine
     ];
   };
 }
-

modules/hosts/shadow/disks.nix

@@ -0,0 +1,192 @@
+{...}: {
+  # Every filesystem on shadow lives here, hand-maintained.
+  #
+  # hardware.nix is generated with `--no-filesystems` precisely so it never
+  # emits fileSystems/swapDevices entries of its own. That keeps regeneration
+  # (`nix run .#sync-hardware`) safe: re-running it can never clobber these
+  # definitions, nor produce duplicates for whichever data drives happened to
+  # be mounted at the time it ran.
+  flake.nixosModules.shadowDisks = {pkgs, ...}: let
+    # Secondary data drives, addressed by filesystem label.
+    #
+    # nofail on all of them: it stops a missing or dying disk from becoming a
+    # failed boot dependency that drops the machine into emergency mode.
+    #
+    # On-disk ownership is already ahmza mode 755 on all three, so no uid mapping
+    # is needed — ext4 stores ownership in the filesystem and ignores uid=/gid=.
+
+    # Spinning disks (sda/sdc, both WD, rotational=1). noauto +
+    # x-systemd.automount makes systemd generate an .automount unit and mount on
+    # first access to the path rather than at boot, so they stay parked until
+    # something actually touches them; idle-timeout unmounts them again once
+    # quiet so they can spin back down.
+    #
+    # Note the idle unmount fails with "target is busy" while any shell has its
+    # cwd inside the mount. That is harmless — it simply stays mounted and retries.
+    spinningDrive = label: {
+      device = "/dev/disk/by-label/${label}";
+      fsType = "ext4";
+      options = [
+        "nofail"
+        "noauto"
+        "x-systemd.automount"
+        "x-systemd.idle-timeout=600"
+        "x-systemd.device-timeout=10"
+      ];
+    };
+
+    # Always-on drive. Used for the games library: it is an SSD (Samsung 870 QVO,
+    # rotational=0) so there is no spin-down to gain, and a Steam library is
+    # better off never sitting behind an automount trigger.
+    #
+    # Unrelated but worth knowing, since it looks like a mount problem: Steam's
+    # FHS sandbox builds its bind list at launch by iterating /*, so a top-level
+    # directory that does not exist when Steam starts is invisible to that
+    # instance for its whole lifetime, and Steam reports it as "not writable".
+    # /mnt only comes into existence when these entries are activated, so Steam
+    # must be restarted after a fresh boot-time change here.
+    eagerDrive = label: {
+      device = "/dev/disk/by-label/${label}";
+      fsType = "ext4";
+      options = [
+        "nofail"
+        "x-systemd.device-timeout=10"
+      ];
+    };
+
+    # Pin the NFS server until nas.hfx.ahmza.com points at 10.10.100.4.
+    # Automounting keeps an unavailable NAS out of the boot path.
+    nfsShare = export: {
+      device = "10.10.100.4:${export}";
+      fsType = "nfs";
+      options = [
+        "nfsvers=4.2"
+        "noauto"
+        "nofail"
+        "_netdev"
+        "x-systemd.automount"
+        "x-systemd.idle-timeout=600"
+        "x-systemd.mount-timeout=10"
+      ];
+    };
+  in {
+    fileSystems = {
+      # Boot essentials, by UUID. UUIDs rather than labels here on purpose:
+      # these two must resolve unambiguously, and a label is only as unique as
+      # the last disk someone plugged in.
+      "/" = {
+        device = "/dev/disk/by-uuid/deff63fc-1738-4cfc-a79c-06e58c78471a";
+        fsType = "ext4";
+      };
+
+      "/boot" = {
+        device = "/dev/disk/by-uuid/5873-AD05";
+        fsType = "vfat";
+        options = ["fmask=0077" "dmask=0077"];
+      };
+
+      "/mnt/dump" = spinningDrive "DUMP";
+      "/mnt/bak" = spinningDrive "BAK";
+      "/mnt/games" = eagerDrive "GAMES";
+      "/mnt/nas" = nfsShare "/srv/nas";
+      "/mnt/media" = nfsShare "/srv/media";
+    };
+
+    # Swap exists for hibernation, not for memory pressure — 31GiB of RAM on a
+    # desktop rarely needs paging. The hibernation image must fit in swap, so the
+    # floor is "as big as RAM"; 40GiB leaves headroom above that.
+    #
+    # NVIDIA video memory does NOT land here: with
+    # NVreg_PreserveVideoMemoryAllocations=1 (set by
+    # hardware.nvidia.powerManagement.enable) the driver spools the 3090's VRAM
+    # to NVreg_TemporaryFilePath, which is unset and so defaults to /tmp. That is
+    # only safe because /tmp is on this ext4 root — if /tmp ever becomes a tmpfs
+    # (boot.tmp.useTmpfs) that VRAM dump goes into RAM and hibernation breaks.
+    #
+    # On non-btrfs filesystems NixOS creates this with `dd if=/dev/zero`, so the
+    # file is fully allocated rather than sparse. That matters because the kernel
+    # writes swap through the block layer using the extent map swapon built,
+    # bypassing the filesystem — so the mapping has to be stable and complete.
+    #
+    # The failure is loud, not silent, though: swapon refuses a file with holes
+    # outright ("skipping - it appears to have holes"), so a sparse file would
+    # simply leave the system with no swap rather than corrupt anything. Genuine
+    # silent corruption is the copy-on-write case, which is why btrfs needs
+    # chattr +C and a NOCOW-from-creation file.
+    swapDevices = [
+      {
+        device = "/var/lib/swapfile";
+        size = 40 * 1024; # MiB
+      }
+    ];
+
+    # Resuming from hibernation needs the kernel to be told where the image is,
+    # and for a swap *file* that means both halves below.
+    #
+    # boot.initrd.systemd.enable is true on this host, which makes this
+    # mandatory rather than optional: under systemd initrd the `resume=` kernel
+    # param is emitted ONLY from boot.resumeDevice. The legacy stage-1 script
+    # that scans swapDevices to find a resume device is not in play. Without
+    # this, hibernate succeeds and the machine then cold-boots, silently
+    # discarding the session.
+    #
+    # resume_offset is the physical block offset of the swapfile's first extent,
+    # because the kernel addresses the file by raw block, not by path. Recompute
+    # it with the following if the swapfile is ever recreated, resized, or moved
+    # — a stale value resumes from the wrong blocks:
+    #
+    #   sudo filefrag -v /var/lib/swapfile | awk '$1=="0:" {gsub(/\.\./,"",$4); print $4}'
+    #
+    # filefrag reports in 4096-byte filesystem blocks and the kernel wants
+    # PAGE_SIZE units; on x86_64 both are 4096, so the number transfers directly.
+    boot.resumeDevice = "/dev/disk/by-uuid/deff63fc-1738-4cfc-a79c-06e58c78471a";
+    boot.kernelParams = ["resume_offset=499355648"];
+
+    # A stale resume_offset fails *silently*: the kernel finds no swsusp
+    # signature at the given block, logs `PM: Image not found (code -22)`, and
+    # cold-boots — the hibernated session is simply gone, with no error at
+    # hibernate time. Since the value above is hand-copied, check it on every
+    # activation so drift surfaces as a warning instead of as a lost session.
+    #
+    # Two known limits, both acceptable:
+    #   * nixpkgs only recreates the swapfile when `size` changes, so on the one
+    #     rebuild that resizes it this check still sees the old file and passes;
+    #     it fires on the next rebuild instead. It is a drift detector, not a
+    #     pre-flight gate.
+    #   * Warn rather than fail: activation must not be blocked over this, and it
+    #     is expected to read nothing at all on a fresh install where
+    #     mkswap-var-lib-swapfile.service has not run yet.
+    system.activationScripts.checkResumeOffset.text = ''
+      swapfile=/var/lib/swapfile
+      want=499355648
+      if [ -f "$swapfile" ]; then
+        got=$(${pkgs.e2fsprogs}/bin/filefrag -v "$swapfile" 2>/dev/null \
+              | ${pkgs.gawk}/bin/awk '$1=="0:" {gsub(/\.\./,"",$4); print $4; exit}') || got=""
+        if [ -n "$got" ] && [ "$got" != "$want" ]; then
+          echo "WARNING: resume_offset is pinned to $want in modules/hosts/shadow/disks.nix," >&2
+          echo "         but $swapfile now starts at block $got. Hibernation will cold-boot" >&2
+          echo "         and lose the session until boot.kernelParams is updated to $got." >&2
+        fi
+      fi
+    '';
+
+    # This host sleeps via suspend-then-hibernate (hypridle in the dotfiles repo
+    # is what invokes it): S3 first so a quick return is instant, then a real
+    # suspend-to-disk once the machine has clearly been abandoned.
+    #
+    # Deliberately NOT hybrid-sleep, which writes the disk image up front on
+    # every single sleep. Measured here that cost ~59s of filesystem sync plus an
+    # 11GiB write before the screens even went off, and because an S3 wake
+    # invalidates the image the next boot always reported `PM: Image not found
+    # (code -22)` — full hibernation price paid every time, redeemed only on a
+    # power cut. suspend-then-hibernate defers that write until it is actually
+    # worth doing, and unlike hybrid-sleep it is a mode NVIDIA explicitly
+    # supports (see the system-sleep hook installed by the gpuNvidia module).
+    #
+    # HibernateDelaySec is set explicitly because systemd otherwise derives the
+    # handoff from battery discharge estimation, and this desktop has no system
+    # battery — the sole /sys/class/power_supply entry is a Logitech mouse
+    # reporting scope=Device, which is ignored for that purpose.
+    systemd.sleep.settings.Sleep.HibernateDelaySec = "30min";
+  };
+}

modules/hosts/shadow/shadowConfiguration.nix

@@ -7,6 +7,93 @@
     networking = {
       hostName = "shadow";
     };
+
+    # Windows lives on the 476G NVMe -- the one with three partitions: 16M
+    # "Microsoft reserved" MSR, 476G NTFS (fs-uuid 70E4E841E4E80AE4, the C:
+    # volume), 832M WinRE. Identified by layout rather than by nvmeXnY on
+    # purpose; see the enumeration note below.
+    #
+    # That disk has NO EFI System Partition of its own -- its 16M partition is a
+    # "Microsoft reserved" MSR with no filesystem. Windows was installed against
+    # the ESP that NixOS now owns: the 1G vfat partition fs-uuid 5873-AD05 on the
+    # 1.9T NVMe (that disk holds only two partitions, the ESP and the ext4 root
+    # deff63fc-1738-4cfc-a79c-06e58c78471a). So both OSes boot from one shared
+    # ESP; there is no separate Windows boot drive.
+    #
+    # The NixOS install reformatted that ESP, which wiped
+    # EFI/Microsoft/Boot/{bootmgfw.efi,BCD} and left Windows unbootable. That has
+    # since been repaired from WinRE and both files are back in place, so the
+    # menuentry below is live. Keep the recovery command to hand in case the ESP
+    # is ever reformatted again -- it has to be run from Windows install media or
+    # WinRE, because the BCD store cannot be generated from Linux:
+    #
+    #   bcdboot C:\Windows /s S: /f UEFI      (S: = the ESP, fs-uuid 5873-AD05)
+    #
+    # Copying bootmgfw.efi alone is not enough; without BCD it fails 0xc000000f.
+    # Note bcdboot also drops a copy of the Windows boot manager at
+    # EFI/BOOT/bootx64.efi -- see the fallback-path note in core/boot.nix.
+    #
+    # Chainloaded explicitly rather than via grub.useOSProber: deterministic,
+    # pulls in no extra tooling, and avoids probing every disk on each bootloader
+    # install. The `-f` guard makes the entry self-disabling: it renders only
+    # while bootmgfw.efi is actually present, so a future ESP reformat degrades
+    # to a missing menu item rather than one that boots into an error.
+    #
+    # fs-uuid is shadow's ESP, matching the "/boot" entry in disks.nix. Searching
+    # by UUID rather than (hdX,gptN) matters here: NVMe enumeration is not stable
+    # on this board -- /boot has been seen as both nvme0n1p1 and nvme1n1p1. For
+    # the same reason, re-derive device names before running anything
+    # destructive:
+    #
+    #   lsblk -o NAME,SIZE,FSTYPE,PARTTYPENAME,UUID,MOUNTPOINT
+    #
+    # Windows' boot files now occupy ~30-60MiB of that shared 1G ESP and Windows
+    # Update rewrites them periodically, which is part of why
+    # grub.configurationLimit is held at 10 in core/boot.nix.
+    #
+    # Before dual-booting, turn off Windows Fast Startup. hiberfil.sys is present
+    # on the 476G NTFS volume, and Fast Startup plus this host's hibernation
+    # setup will corrupt any NTFS volume mounted read-write from both sides.
+    #
+    # On the GRUB script itself:
+    #
+    # The outer `search` + `-f` test run at *boot*, while GRUB parses grub.cfg —
+    # not at Nix eval time. That is why repairing Windows needed no rebuild: the
+    # entry started rendering as soon as bcdboot put bootmgfw.efi back, and it
+    # will stop again by itself if the file disappears.
+    #
+    # The `-n "$esp"` test is a *separate,
+    # nested* if rather than `[ -n "$esp" -a -f ... ]`: a failed search leaves
+    # $esp unset, and GRUB's `test` builtin evaluates both operands of `-a`
+    # rather than short-circuiting, so the combined form would still expand the
+    # `-f` to `()/...` and could complain about a bad device on every boot.
+    # Nesting guarantees the path test is not reached at all.
+    #
+    # No `insmod` is needed for the outer search: GRUB's EFI core image already
+    # embeds part_gpt/fat/search_fs_uuid, since it must find its own $prefix on
+    # the FAT ESP before reading this file. NixOS' own install-grub.pl relies on
+    # exactly that for the search it emits. The insmods inside the menuentry are
+    # kept only because `chain` genuinely is a separate module.
+    #
+    # The inner `search` deliberately repeats the outer one rather than reusing
+    # `set root=$esp`. It costs one extra disk scan, and only when the entry is
+    # actually selected, in exchange for a menuentry that is self-contained and
+    # cannot be broken by anything that clobbers $esp in between. This also
+    # matches the per-entry search install-grub.pl generates.
+    boot.loader.grub.extraEntries = ''
+      search --no-floppy --set=esp --fs-uuid 5873-AD05
+      if [ -n "$esp" ]; then
+        if [ -f ($esp)/EFI/Microsoft/Boot/bootmgfw.efi ]; then
+          menuentry "Windows Boot Manager" --class windows --class os {
+            insmod part_gpt
+            insmod fat
+            insmod chain
+            search --no-floppy --set=root --fs-uuid 5873-AD05
+            chainloader /EFI/Microsoft/Boot/bootmgfw.efi
+          }
+        fi
+      fi
+    '';
   };
 }
 

modules/hosts/t480/_hardware.nix

@@ -0,0 +1,27 @@
+# GENERATED FILE — do not edit by hand.
+#
+# Regenerate on the host itself with:  nix run .#sync-hardware
+#
+# Produced by `nixos-generate-config --show-hardware-config --no-filesystems`.
+# The --no-filesystems flag is deliberate: fileSystems and swapDevices are
+# declared by hand in ./disks.nix, so regenerating this file can never clobber
+# them or emit duplicates for whatever happened to be mounted at the time.
+#
+# Leading underscore keeps import-tree from auto-importing this as a
+# flake-parts module (its filter drops any path containing "/_"); it is
+# imported explicitly from ./default.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/installer/scan/not-detected.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "xhci_pci" "nvme" "usb_storage" "usbhid" "sd_mod" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-intel" ];
+  boot.extraModulePackages = [ ];
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+}

modules/hosts/t480/default.nix

@@ -5,8 +5,10 @@
 }: {
   flake.nixosConfigurations.t480 = inputs.nixpkgs.lib.nixosSystem {
     modules = with self.nixosModules; [
-      desktop
+      ./_hardware.nix
+      t480Disks
       t480Configuration
+      desktop
       # CPU microcode + integrated Intel GPU. The T480 also has an NVIDIA MX150;
       # to enable it in PRIME offload mode, swap gpuIntel for gpuNvidiaPrime
       # (which includes gpuIntel). Left on Intel-only by default to save power.
@@ -17,6 +19,13 @@
       obsidian
       discord
       gaming
+      winbox
+      cad
+      prusa-slicer
+      netops
+      via
+      t480UsbWakeup
+      moonlight
     ];
   };
 }

modules/hosts/t480/disks.nix

@@ -0,0 +1,19 @@
+{...}: {
+  flake.nixosModules.t480Disks = {...}: {
+    fileSystems = {
+      "/" = {
+        device = "/dev/disk/by-uuid/25316a27-6846-4922-8a45-854b9e40a19f";
+        fsType = "ext4";
+      };
+      "/boot" = {
+        device = "/dev/disk/by-uuid/562C-B760";
+        fsType = "vfat";
+        options = [ "fmask=0077" "dmask=0077" ];
+      };
+
+    };
+    swapDevices = [
+      { device = "/dev/disk/by-uuid/54e31e3a-af6a-4fd6-8101-4c168d3e482a"; }
+    ];
+  }; 
+}

modules/hosts/t480/t480Configuration.nix

@@ -7,6 +7,13 @@
     networking = {
       hostName = "t480";
     };
+    services.logind.settings.Login = {
+      HandleLidSwitch = "suspend";
+      HandleLidSwitchDocked = "ignore";
+    };
+    services.fwupd = {
+      enable = true;
+    };
   };
 }
 

modules/hosts/t480/usb-wakeup.nix

@@ -0,0 +1,19 @@
+{...}: {
+  flake.nixosModules.t480UsbWakeup = {...}: {
+    services.udev.extraRules = ''
+      # Wake the T480 from S3 suspend via a keyboard plugged into a built-in USB
+      # port. The dock connects over the Thunderbolt-3 controller (3c:00.0), which
+      # powers down in S3 and cannot detect a cold replug — so dock-connected input
+      # cannot wake the machine after an unplug-triggered suspend. The built-in xHCI
+      # (00:14.0) stays wake-capable in S3, so a keyboard on a built-in port works.
+      #
+      # Arm ONLY the keyboard itself (match by VID:PID — the USB bus path is
+      # unstable across re-enumeration). Deliberately do NOT arm the built-in root
+      # hubs: arming a whole root hub makes it wake on hub-level events (USB-C PD
+      # negotiation, the SD card reader, internal peripherals), causing spurious
+      # self-wakes. A leaf device's remote-wakeup propagates through the hub without
+      # the hub's own wakeup flag being set.
+      ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="320f", ATTR{idProduct}=="5055", ATTR{power/wakeup}="enabled"
+    '';
+  };
+}

modules/system/core/boot.nix

@@ -10,10 +10,67 @@
         efi = {
           canTouchEfiVariables = true;
         };
+        # Pinned explicitly. grub.enable defaults to true, so this host silently
+        # switched from systemd-boot (used at install time) to GRUB when this
+        # block was added. NixOS never removes the previous bootloader's files
+        # or its NVRAM entry, so both lived on the ESP and the firmware kept
+        # booting the frozen systemd-boot menu. Keep this explicit, and never
+        # set systemd-boot.enable alongside it.
+        #
+        # Note what this does and does not do. Both of these lines are no-ops
+        # against nixpkgs' defaults (grub.enable is already true,
+        # systemd-boot.enable already false); their value is that a conflicting
+        # definition elsewhere now fails loudly instead of silently winning. They
+        # delete nothing — stale EFI/systemd/, loader/ and the leftover NVRAM
+        # entry have to be removed by hand on any host installed with
+        # systemd-boot. Done on shadow; NOT yet verified on t480.
+        #
+        # This is stock UEFI GRUB: NixOS installs EFI/<distro><esp>/grubx64.efi
+        # (here EFI/NixOS-boot/grubx64.efi) and registers a matching NVRAM entry
+        # via efibootmgr, because canTouchEfiVariables is true. That NVRAM entry
+        # is what makes GRUB the default; NixOS does not manage the removable
+        # fallback path EFI/BOOT/BOOTX64.EFI and we deliberately do not ask it to
+        # (grub.efiInstallAsRemovable, which would need canTouchEfiVariables=false,
+        # is only for firmware that ignores NVRAM entries — neither host needs it).
+        #
+        # On shadow that fallback path is NOT empty, though: bcdboot left a copy of
+        # the *Windows* boot manager at EFI/BOOT/bootx64.efi (byte-identical to
+        # EFI/Microsoft/Boot/bootmgfw.efi). Normal boots are unaffected because the
+        # firmware follows its NVRAM entry to GRUB. But it does mean that if NVRAM
+        # is ever cleared — CMOS reset, battery, firmware update — the fallback
+        # lands on Windows rather than GRUB. Left as-is by choice; recover by
+        # rerunning `nixos-rebuild boot` to reinstate the NVRAM entry.
+        systemd-boot.enable = false;
         grub = {
+          enable = true;
           efiSupport = true;
           device = "nodev";
           theme = pkgs.catppuccin-grub;
+          # Bound the menu so the ESP cannot fill up with old kernels.
+          # install-grub.pl unlinks any $boot/kernels/* not referenced by a kept
+          # generation, so this genuinely caps ESP usage rather than just
+          # trimming the menu.
+          #
+          # Sizing, measured on shadow rather than assumed. Generations share
+          # aggressively in practice: 10 kept generations referenced 1 bzImage
+          # (13.3MiB) and 3 initrds (~33.4MiB each) for 114MiB total, i.e. ~11MiB
+          # per generation, not ~47MiB. Only a kernel or initrd change mints a new
+          # file — and the initrd does change more often than you'd expect, since
+          # nixpkgs embeds /etc/modprobe.d/nixos.conf inside it, so every kernel
+          # module parameter edit produces a fresh one.
+          #
+          # So the real bound is between ~11MiB and ~47MiB per generation
+          # depending on churn: 10 generations costs ~115MiB typically and ~470MiB
+          # worst case, against a 1GiB ESP that also carries grub/x86_64-efi, the
+          # catppuccin theme, and Windows' own boot files (bootmgfw.efi + BCD,
+          # ~30-60MiB) since Windows was bcdboot'd onto this same ESP. 10 keeps
+          # the worst case under half the partition.
+          #
+          # Keep this conservative: overflow fails as `copy ... or die` in
+          # install-grub.pl, which runs *after* the system profile has already
+          # been switched, so the result is an activated but unbootable
+          # generation. t480 reaches this module too and its ESP may be smaller.
+          configurationLimit = 10;
         };
       };
       plymouth = {

modules/system/core/default.nix

@@ -18,11 +18,11 @@
       nix-ld
     ];
   in {
-    imports =
+    # Hardware/disk config is deliberately NOT imported here. It is per-host and
-      [
+    # lives in modules/hosts/<host>/{_hardware.nix,disks.nix}, wired up by that
-        /etc/nixos/hardware-configuration.nix
+    # host's default.nix. Importing it from this shared module used to mean both
-      ]
+    # hosts resolved to whichever machine's /etc/nixos file existed at build time.
-      ++ modules;
+    imports = modules;
     services = {
       openssh.enable = true;
       avahi.enable = true;

modules/system/core/user.nix

@@ -36,6 +36,7 @@
       extraGroups = [
         "networkmanager"
         "wheel"
+        "uinput"
       ];
     };
   };

modules/system/desktop/default.nix

@@ -9,6 +9,7 @@
       hyprland
       sddm
       network
+      yazi
     ];
   in {
     imports = modules;

modules/system/hardware/gpu/nvidia.nix

@@ -3,6 +3,7 @@
   # For Intel+NVIDIA laptops (e.g. the T480), use gpuNvidiaPrime instead.
   flake.nixosModules.gpuNvidia = {
     config,
+    lib,
     pkgs,
     ...
   }: {
@@ -15,15 +16,147 @@
 
     hardware.nvidia = {
       modesetting.enable = true;
-      # Proprietary kernel modules. Set to true only for Turing+ (RTX 20xx and
+      # Open kernel modules. Mandatory to set explicitly on driver >= 560 —
-      # newer) where the open modules are well supported.
+      # the option defaults to null there and nixpkgs asserts against null, so
-      open = false;
+      # this line cannot simply be dropped.
+      #
+      # true because every card this module targets is Turing or later (RTX 20xx
+      # and newer), which is exactly what upstream recommends open modules for.
+      # Set false only for a genuinely pre-Turing card, which would want the
+      # gpuNvidia module pointed at a legacy package branch anyway.
+      #
+      # This is NOT cosmetic and NOT a version switch: `open` selects between two
+      # real builds of the same release — nvidia-open (~12MB) vs the proprietary
+      # nvidia-kernel-modules (~85MB). It has no effect on driver version, which
+      # comes solely from `package` below.
+      #
+      # Kernel modules only change on reboot, so `cat /proc/driver/nvidia/version`
+      # describes the RUNNING module and can disagree with this setting until the
+      # next boot. Compare /run/booted-system against /run/current-system to see
+      # a pending swap.
+      #
+      # mkDefault because "Turing or later" is an assumption about the hosts that
+      # happen to import this module today, not a property of the module itself.
+      # A future pre-Turing card can then override it at the host level instead of
+      # having to edit this file (and note that without mkDefault, importing both
+      # gpuNvidia and gpuNvidiaPrime would be an outright merge conflict rather
+      # than something resolvable).
+      open = lib.mkDefault true;
       nvidiaSettings = true;
-      # Fixes suspend/resume corruption on many setups.
+      # Required for suspend/hibernate to come back with an intact framebuffer:
+      # this sets NVreg_PreserveVideoMemoryAllocations=1, so VRAM contents are
+      # spooled out across sleep instead of being discarded.
+      #
+      # The driver spools VRAM to NVreg_TemporaryFilePath, which nixpkgs leaves
+      # unset so it defaults to /tmp. Keep /tmp on a real filesystem — setting
+      # boot.tmp.useTmpfs would route a full VRAM dump into RAM, which on a
+      # large card is enough to break hibernation outright.
       powerManagement.enable = true;
+      # Which mechanism tells the driver about sleep transitions. Two options:
+      #
+      #   true  -> NVreg_UseKernelSuspendNotifiers=1; the driver hooks the
+      #            in-kernel PM notifier chain and the systemd units are NOT
+      #            generated.
+      #   false -> nvidia-{suspend,hibernate,resume}.service call nvidia-sleep.sh
+      #            around systemd-{suspend,hibernate}.service.
+      #
+      # Pinned to false deliberately. nixpkgs defaults this to
+      # `useOpenModules && version >= 595`, which is silently true here (open =
+      # true above, driver 595), and that path wedges the GPU on resume — the
+      # notifier callback warns and then the card never comes back:
+      #
+      #   WARNING: nvidia/nv.c:4564 at nv_restore_user_channels+0x1d9/0x240
+      #     nv_pm_notifier+0x35/0xa0 [nvidia]
+      #   nvidia-modeset: ERROR: GPU:0: Failed detecting connected display devices
+      #   NVRM: GPU0 _issueRpcAndWait: rpcSendMessage failed with status 0x11
+      #
+      # followed by an unrecoverable GSP RPC storm, i.e. black screens until a
+      # hard power cycle. Revisit once a newer driver fixes the notifier path;
+      # test by flipping this to true and confirming a hibernate round-trip
+      # relights the displays before leaving it that way.
+      powerManagement.kernelSuspendNotifier = false;
       package = config.boot.kernelPackages.nvidiaPackages.stable;
     };
 
+    # The nvidia-{suspend,hibernate,resume}.service units nixpkgs generates are
+    # wired only to systemd-{suspend,hibernate}.service. suspend-then-hibernate
+    # runs as a single systemd-suspend-then-hibernate.service that performs both
+    # transitions internally, so those units never fire for it and the GPU would
+    # sleep with VRAM unspooled.
+    #
+    # NVIDIA ships a hook that handles exactly this, dispatching on
+    # $SYSTEMD_SLEEP_ACTION and covering the suspend-after-failed-hibernate case
+    # too. nixpkgs sets `systemd.packages = nvidia_x11.out`, but that only
+    # collects lib/systemd/system/, never lib/systemd/system-sleep/, so upstream's
+    # hook is silently discarded. Install it by hand.
+    #
+    # It must NOT be installed verbatim, though. Past its suspend-then-hibernate
+    # branch the hook ends in an unconditional fallthrough:
+    #
+    #   case "$1" in post) nvidia-sleep.sh "resume" ;; esac
+    #
+    # For plain suspend/hibernate that duplicates nvidia-resume.service, and the
+    # duplicate is destructive rather than merely redundant: nvidia-sleep.sh's
+    # RestoreVT() reads /run/nvidia-sleep/Xorg.vt_number, *deletes* it, then
+    # chvt's back. `chvt` lives in pkgs.kbd, which nixpkgs puts on
+    # nvidia-resume.service's `path` but which is absent from the stripped PATH
+    # systemd-sleep gives its hooks. So the hook consumes the VT file, fails to
+    # chvt, and the real unit then finds nothing to restore — no VT switch at
+    # all, i.e. the same black-screen-on-resume this module exists to avoid.
+    #
+    # Hence the first line of the wrapper: bail out unless systemd is actually
+    # doing suspend-then-hibernate, the one transition nixpkgs' units do not
+    # cover. Upstream's own comment notes that its suspend-then-hibernate path
+    # deliberately writes /proc/driver/nvidia/suspend directly and leaves the VT
+    # switch to nvidia-resume.service, so gating here loses nothing.
+    #
+    # The wrapper also has to PATCH A HOLE in upstream's dispatch. Its
+    # suspend-then-hibernate branch is:
+    #
+    #   case "$1:$SYSTEMD_SLEEP_ACTION" in
+    #       post:*)                             echo resume    > ... ;;
+    #       pre:hibernate)                      echo hibernate > ... ;;
+    #       pre:suspend-after-failed-hibernate) echo suspend   > ... ;;
+    #   esac
+    #
+    # There is no `pre:suspend`. But that is exactly the FIRST leg of
+    # suspend-then-hibernate: systemd invokes the hook with $1=pre and
+    # SYSTEMD_SLEEP_ACTION=suspend before the S3 transition. It matches nothing,
+    # the case falls through, and the driver never gets its VRAM-spool handshake
+    # — so with NVreg_PreserveVideoMemoryAllocations=1 the GPU refuses to
+    # suspend and the whole operation aborts:
+    #
+    #   nvidia 0000:2d:00.0: PM: failed to suspend async: error -5
+    #   PM: Some devices failed to suspend, or early wake event detected
+    #   systemd-sleep: Failed to put system to sleep. System resumed again:
+    #     Input/output error
+    #
+    # Observed on this host: plain suspend and plain hibernate both worked (their
+    # nvidia-*.service units did the handshake) while suspend-then-hibernate
+    # failed at the S3 leg with no nvidia unit having run at all. So handle
+    # pre:suspend here, the same way upstream handles pre:hibernate, then hand
+    # everything else to upstream unchanged.
+    #
+    # Guarded on the same condition nixpkgs uses for the units: with the kernel
+    # suspend notifier active the driver handles transitions in-kernel and this
+    # hook must not also poke /proc/driver/nvidia/suspend.
+    environment.etc."systemd/system-sleep/nvidia" = lib.mkIf (config.hardware.nvidia.powerManagement.enable
+      && !config.hardware.nvidia.powerManagement.kernelSuspendNotifier) {
+      source = pkgs.writeShellScript "nvidia-system-sleep-hook" ''
+        [ "$2" = "suspend-then-hibernate" ] || exit 0
+
+        # The gap upstream leaves: the S3 leg of suspend-then-hibernate.
+        if [ "$1" = "pre" ] && [ "$SYSTEMD_SLEEP_ACTION" = "suspend" ]; then
+          if [ -f /proc/driver/nvidia/suspend ]; then
+            echo suspend > /proc/driver/nvidia/suspend
+          fi
+          exit 0
+        fi
+
+        exec ${config.hardware.nvidia.package.out}/lib/systemd/system-sleep/nvidia "$@"
+      '';
+    };
+
     environment.systemPackages = with pkgs; [
       vulkan-tools
     ];

modules/system/nix-ld/default.nix

@@ -8,6 +8,10 @@
           stdenv.cc.cc
           zlib
           libusb1
+          # required for qmlls in nvim
+          brotli
+          unixodbc
+          glib
         ];
       };
     };

result

@@ -1 +0,0 @@
-/nix/store/dgd4pa9cl1n266zsbf8xi277p304zxcw-nixos-system-t480-26.05.20260803.531670d